May 10
Ultra Fog Nozzles Test Tool

Ultra Fog Nozzles Test Tool

Test Tool is patented solution for Ultra Fog Nozzles to verify the function of sprinkler system. It let You flush each nozzle to check water quality.   Features: – Unique features for testing sprinkler head – Simple procedure for testing – Direct response for measuring k-factor – Works in pilot pressure mode – Drains out air piping network efficiently – Verifies function of water release

May 10
Electric Section Valve

Electric Section Valve

Features: – Sand cast/forged brass section valves for the electrical activation of a dry pipe system. – Modular design for ¬flexible configuration of groups of hydraulically and electrical section valves. – Reduce peak pressures in the piping system. – Allows isolation of an individual section of sprinklers for maintenance work. – Allows operational testing of the system.

May 10
Hydraulic Section Valve

Hydraulic Section Valve

Features: – Flow: For 100 bar system up to 200 litres/min – Electric driven piston high pressure pump with frequency controlled rpm on motor with adjustable system pressure for small systems – Easy to install, access, operate and maintain – Strainer 50 micron, safety valve, pressure gauge, pressure transmitter and test outlet under the same hood

May 10
Open Nozzles

Open Nozzles

The open nozzle is normally open and is used in systems with intelligent activation. The water will pass through the nozzle creating small droplets as soon as the pipe to the nozzle is pressurized with water.   Features: - Unique patented design with high performance for cooling effect and low consumption of water. - Easy to install and test for both commissioning and maintenance. - 202 nozzles are supplied with a star lock for easy mounting. - 202 nozzle body can be ...

May 10
Nozzles with Glass Bulb

Nozzles with Glass Bulb

The nozzle with a bulb is normally closed and is used in systems with conventional activation. In the top of the nozzle there is a glass bulb that keeps a piston in place. The piston prevents the nozzle from leaking. When the nozzle is affected by the heat of the fire, the glass bulb will burst releasing the piston. The water will then pass through the nozzle creating small droplets.   Features: - Unique patented design with high performance ...

May 10
Accumulator Unit

Accumulator Unit

Features: – Compact and modular designed accumulator skid unit. – Standard issue with 50 litres nitrogen bottle and 68 litres water bottle. – Robust galvanized skid-bars. – Electrically controlled gas valve with manual override. – Pressure switch for low nitrogen pressure Technical Data: – Nitrogen ¬lling pressure – 200 bar – Nitrogen bottle volume – 50 Litres – Water bottle volume – 68 Litres – Voltage supply* – 24 v dc 13 w * Other voltages available upon request

May 10
Pump Station MPU235 – MPU335

Pump Station MPU235 – MPU335

Features: – Flow: For 100 bar system up to 100 litres/min (MPU235) and up to 150 litres/min (MPU335) – Electric driven piston high pressure pump with frequency controlled rpm on motor with adjustable system pressure with integrated pilot pump – Easy to install, access, operate and maintain – Strainer 50 micron, safety valve, pressure gauge, pressure transmitter and test outlet under the same frame   Technical Data: – Outlet pressure: 100 – 130 bar – Inlet water ¬ow: 112 litres/min at 2 bar (MPU235) ...

May 10
Pump Station P35

Pump Station P35

Features: – Flow: For 100 bar system up to 50 litres/min – Electric driven piston high pressure pump with frequency controlled rpm on motor with adjustable system pressure for small systems – Easy to install, access, operate and maintain – Strainer 50 micron, safety valve, pressure gauge, pressure transmitter and test outlet under the same hood   Technical Data: – Outlet pressure: 100 – 130 bar – Inlet water ¬ow: 56 litres/min at 2 bar – Flow: 35 – 50 litres/min – Power consumption: 11kw – ...

May 10
Master Pump Station

Master Pump Station

Features: – Flexible designed pump station with 1 – 4 internal buffer tanks to hold the high pressure pumps. – Pump unit can be equipped with 2 – 8 high pressure pumps normally with one spare. – Electric / Air driven pilot pump. – Each tank fi­tted with two 25μm ­liters – Temperature safety drain valve and Pressure regulator – Test valve on manifold.   Technical Data: – Outlet pressure: 100 – 140 bar – Flow range: 94 – 150 litres/min/high pressure pump – Power consumption: ...

May 10
Micro Pump Station

Micro Pump Station

Features: – Compact designed pump station with 1-3 high pressure pumps with air driven pilot pump – Each tank fi­tted with two 25μm ­liters – Temperature safety drain valve and pressure regulator – Test valve on manifold – Extended low rate with optional frequency controlled rpm   Technical Data: – Outlet pressure: 100 – 150 bar – Flow at 1500 rpm: 48 litres/min/pump – Flow at 2200 rpm (optional): 75 litres/min/pump (frequency controlled) – Power consumption: 11 to 16 kw/pump/standard 50Hz – Voltage Supply: 3 x 400 ...